| After-sales Service: | Online Support |
|---|---|
| Warranty: | Na |
| Screw Number: | Multi Screw Pump |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The KG70KY/7.5F4 seal oil pump is a pump designed with three intermeshing screws. It has excellent suction capacity and can maintain a relatively stable flow rate and pressure when transporting liquids. It is particularly suitable for the fluid transportation requirements of generator seal oil systems.
The KG70KY/7.5F4 seal oil pump can handle liquid media with a viscosity range of 3 to 760 mm²/s. It is suitable for different viscosity oils, including various fuel oils, hydraulic oils, mechanical oils, turbine oils, heavy oils, and other liquid media. Its maximum delivery pressure is 4.0 MPa, and the medium temperature does not exceed 150°C, making it suitable for high-temperature and high-pressure environments.
Structure:
The KG70KY/7.5F4 seal oil pump consists of the following main components: the driving screw, driven screw, shaft sleeve, liner, front cover, and rear cover. The structure of three intermeshing screws provides the pump with excellent suction capacity and stable fluid transportation performance. The shaft sleeve is used to install the driving screw and driven screw. The liner is installed inside the pump body to accommodate the driving screw and driven screw, forming a sealing chamber. The front cover and rear cover are located at the ends of the liner and are fixed to the entire pump structure by bolts, bearings, and other components.
Working Principle
The working principle of the KG70KY/7.5F4 seal oil pump is as follows: The motor drives the driving screw to rotate, which in turn drives the driven screw to rotate. Due to the movement of the screws, a sealed chamber is formed at the suction port of the pump, and the liquid is drawn into it. With the rotation of the screws, the volume of the sealed chamber remains stable, and the liquid is continuously and uniformly transported along the axial direction of the screws to the pump's discharge port. This design ensures stable and non-turbulent liquid transportation, achieving a reliable liquid delivery function. The working principle of the triple-screw pump relies on the stability of the screw design and the constant volume of the sealed chamber to ensure smooth liquid transportation.
| Technical Specification of Screw Pump | |
| Pump Type | Screw Pump |
| Medium | Lubricant(oil), Vegetable oil, Water ethylene glycol, Lubricating grease, Light diesel oil, Fuel wastage(oil), Other sticky chemical medium |
| Flow | 5-5300L/min |
| Speed | 500-3000rpm |
| Temperature | 0-150°C |
| Medium Requirement | No solid particles |
| Operating pressure | ≤4.0Mpa |
| Viscosity range | 3-1500mm2/s |
| Allowed suction height | ≤8m |
| Mounting Type | Horizontal |
| Usage | Special use for power industry |
| Rotation direction | right rotation |
| Spiral rise angle | 40 |
| Bearing form | built-in |
| Inlet and outlet position | right in and left out |
| Material | iron pump body+ductile iron liner |
Yoyik offers different types of Hydraulic pumps for industrial users:
pump Coupling elastic block 02-345388
water pump 300CS-58C
300MW turbine DC Emergency pump impeller gasket 125LY-35-4
sealing oil station main oil bearing HSNH440Q2-46NZ
hydraulic pump shaft seal 125LY-32B
300MW turbine main oil pump guide coupling 125LY-35-4
air side sealing oil pump HSNH210-46A
300MW turbine DC Emergency pump coupling driving pin 125LY23-4
high temp centrifugal pump AZ150-315C
300MW turbine main oil pump guide impeller 125LY 23-4
oil sealed rotary vacuum pump working principle 30-WS
transmission transfer pump 125LY-35-4
oil recirculation system 02-125801-3
steam driven boiler feed pump HZB253-640-03-09
stainless steel centrifugal water pump YCZ50-250A
rotary type oil pump F3-V10-IS6S-IC-20
central lubrication pump 100LY-205
hydraulic piston pump price PVH074R01AB10A250000002001AE010A
single plunger pump 0508.886T1201.AW022
Standard & solid packaging ensures your goods safety.
- TECHNICAL PATENTS -
- OUR ADVANTAGE -
- ORDER NOTES -
√ Model Selection- FAQ -
- Are you trading company or manufacturer?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}